Note: Only licensed and trained contractors should install or service these products. Please refer to the installation instructions for specifics for each unit.We sell our products only to authorized OEMs and distributors.

J Series Combination/Universal Standing Pilot Burner
These “J” Series pilot burners are used with standing pilot burner ignition systems. Many configurations are available to meet your needs. These pilot burners use inlet fittings with a unique dual orifice design allowing for better pilot flame stability. These models contain all the required accessories for direct field replacement of several common styles.

• Product Information
• Technical Bulletin
• Application Note
  

 

J Series Pilot Burner Assemblies
These “J” Series pilot burner assemblies are used with intermittent ignition systems (IPI) and standing pilot systems.  These pilot burners use inlet fittings with a unique dual orifice design allowing for better pilot flame stability.  Many pilot burner configurations are available to meet your needs including custom made applications. Consult BASO Gas Products for details required to meet any specific application.

R Series Pilot Burner Fittings
R219-7 is an elbow, 1/8 NPT x ¼ cc with nut, and the R-43283-2 is a ¼” compression coupling.

Y57 Sensing Cables
The Y57FG-26 is a 36-inch high voltage cable, the Y57HH-36 is a 36 inch sensing probe cable for the Y57TC-2, and the Y57HP-36 is a replacement cable for the Y75RJ-1.

Y75 Replacement Flame Sensor
These sensors may be used to replace broken or damaged sensing probes in G60, G65, G67, G600, G670 or G770 electronic ignition controls systems. These replacement parts must not be used for new field applications.

Y90 BASO Inlet Fitting
BASO offers a variety of inlet fittings to meet your needs. Go to page 11 of the product bulletin to learn about the various configurations and how to order them.