Ignition Controls | Baso Electronic Control Module

Ignition Controls

Gas ignition control products from Baso are well known throughout the industry for their high quality and reliability. Ignition Controls and Ignition Modules by Baso Gas Products.

Our warranty is 2 years.
BASO has been compliant for the past year on the following: UL and CSA "harmonized: the gas burner control standards based on International Electrotechnical Commission Standard IEC60730-1 & IEC60730-2-5 required since 2015. This is the same basic requirements used governing controls that are CE compliant to EN298:2012. The change to the standard affects both software and hardware. All controls sold in North America must be compliant by October 2023.

120 VAC Direct Spark Ignition

The Direct Spark Ignition is designed for direct burner ignition and supervision. It can be used for applications such a ...

120 VAC Intermittent Pilot Ignition

The Intermittent Pilot Ignition is designed for indirect burner ignition and supervision. It can be used for application ...

24 Volt Direct Spark Ignition Control Module

BASO sereis Direct Spark Ignition Controls are microprocessor based controls suited for replacement and new applications ...

24 Volt Intermittent Pilot Ignition Control Module

BASO has designed-in features to retrofit other universal field replacement of other manufactured Intermittent Pilot Ign ...

BG1600M Intermittent Pilot Ignition Control with Rollout Switch

BG1600M01CR-1BD Replaces G775RJD BG1600M00ER-1BD Replaces G770RJA ...

BGH Series Hot Surface Ignition Control

Provides continuous and precise monitoring of the HSI element, wiring, and gas valve, and shuts down in the event of a f ...

BGH2UNCNTRLHT-01 Universal Hot Surface Ignition Control

The BASO Gas Products BGH2UNCNTRLHT-01 Universal Series Hot Surface Ignition (HSI) control is microprocessor based with ...

BGQ15HAA-1 Retrofit Spark Ignition System

The BGQ15HAA system uses a solid-state electronic ignition control to light a pilot burner by spark. Pilot gas is ignite ...

C107U-1 Universal Direct Spark Ignition

The C107U Universal Direct Spark Gas Ignition Control module replaces many Honeywell, Fenwal, ICM, White Rodgers and Joh ...

C610U-1 24-VAC Univ. Intermittent Pilot Ignition

The C610U-1 Universal Intermittent Pilot Ignition Control replaces many existing intermittent pilot ignition controls ma ...

Continuous Spark Block Igniter

The CS222, CS322 and CS422 Continuous Spark Block Igniters are high voltage spark ignitions for use on commercial and in ...

CS100/CS300 Spark Igniter (Pilot Re-Lite Control)

The model CS100 is a 24 VAC and CS300 is a 120 VAC unit. Both models have the option for potted. Comes standard 4 Ground ...

E Series CE/AGA Approved Intermittent Ignition

The E Secries CE/AGA Approved Intermittent Pilot Ignition Control is a safety control designed for indirect burner igni ...

Honeywell Replacements

Fry Master Replacements ...

Ignition Control Accessories

Rajah Male to 1/4 Inch Female SpadeResistive Wiring Harnesses ...

Ignition Control Replacement Cross Reference

Lennox Pulse Replacement for G891

The BASO BGN891 (black) Ignition Control is a direct replacement for Natural Gas or Propane ovens which have a Johnson C ...

N Series 24 VAC Direct Spark Ignition Control

The N Series Direct Spark Ignition Control is a safety control designed for indirect burner ignition and supervision, fo ...