BGD258 Series Class A Redundant Dual Electric Solenoid Gas Valve

The BGD 258 Class A series gas valve is a combination of main and pilot valve without regulation intended for use in conjunction with solid-state sequence ignition control/flame relay units operating at higher gas pressure.

Need help finding the right product?

  • Maximum working pressure: 138 mbar (2.0 psi)
  • Available voltages: 12 VDC, 25 VDC, 25 VAC, 120 VAC, 240 VAC
  • Inlet/Outlet sizes: 3/8 inch, 1/2 inch NPT or BSPT
  • Pilot/Pressure tap sizes: 1/8 inch NPT or BSPT
  • Natural Gas flow capacity (Btu/hr. at 1 inch pressure drop)
    • 300,000 for 3/8 NPT
    • 350,000 for 1/2 NPT
  • Temperature rating:  -29° to 79°C (-20° to 175°F)
  • Operable gas type: Natural Gas or LP
  • General Heating Equipment – Garage heaters, wall heaters, salamander heaters, “torpedo furnaces,” “salamander furnaces” and “salamander.”
  • Outdoor Firepits and Pool Spa
  • Commercial Cooking- Gas stoves, ovens, broilers, fryers
  • Agriculture – Forced Air Heaters, Spot Heating, brooders designed for hog complexes including areas, nursery, weaning, and finish buildings, and gas heaters for chicken brooders.
  • Commercial Laundry – Gas dryers
  • Other heating equipment requiring higher flow rates
Agency Listing
  • Australian Gas Association
  • CE
  • CSA
  • UL Recognized

Download BGD258 Class A Installation Instructions



Only licensed service professionals of the original equipment manufacturer or trained licensed contractors are approved to install or service BASO Gas Products. BASO Gas Products shall not be liable for damages resulting from misapplication or misuse of its products.

Still have questions?


Shopping Cart
Scroll to Top